How to properly maintain excavator bucket teeth

The excavator bucket teeth are like the sharp teeth of a large beast. A beast with a super-large physique cannot exert its real power without a pair of steel teeth and copper teeth. So, how to properly maintain and care for the "beasts and sharp teeth"?

1 .During the use of the excavator bucket teeth, the outermost teeth of the bucket wear 30% faster than the innermost teeth. After a period of use, the inner and outer teeth of the bucket should be replaced.

2 .The excavator driver should pay attention to the angle of digging during the operation. When excavating, try to make the bucket teeth perpendicular to the working surface when digging down, so as to avoid breaking the excavator bucket teeth due to excessive inclination.

3 .Be careful not to swing the digging arm left and right under the condition of large resistance, which will easily cause the bucket teeth and tooth seat to break due to excessive force on the left and right sides.

4 .The wear of the tooth seat has a great influence on the service life of the excavator bucket teeth. It is recommended to replace the tooth seat after the tooth seat is worn out by 10%. There is a large gap between the tooth seat and the bucket teeth with excessive wear. The fit and force point of the bucket teeth and the tooth seat are changed, and the bucket teeth will break due to the change of the force point.

5 .The driving method of the excavator driver is also critical to improving the utilization rate of the excavator bucket teeth. The excavator driver should try not to close the bucket when lifting the boom, and pay special attention to the coordination of actions during operation. Some excavator drivers often throw the bucket on the rock with too much force during the action of enlarging the arm and sending the forearm, which will smash or crack the bucket teeth and damage the forearm.