Mistakes in the demolition of the building by the demolition front excavator

A excavator driver drove a 30-ton crawler demolition front excavator for the demolition operation. The machine tried to demolish the wreckage of an apartment building.

The driver tried to hammer the building with a breaking hammer, but because the hammer distance was not enough, the front half of the excavator's crawler was suspended on the edge of the mound at this moment.

A few seconds later, as the hydraulic breaker weakened the concrete structure, the wreckage of the building was crumbling and began to collapse in the direction of the demolition front excavator.

When the building began to collapse, the center of gravity of the excavator changed. When a part of the concrete structure hits the arm of the excavator, it was dragged over the edge of the mound and slid for several meters. The situation is very critical!

But fortunately, the demolition front excavator was only dragged a few meters and stopped after tilting, and did not completely overturn. This is also a blessing in misfortune.