Four precautions for the use of heavy duty excavator bucket

If you are an excavator driver, don't miss this article, how to use the heavy duty excavator bucket correctly? Huitong Machinery will tell you below.

1. When digging, it is not advisable to eat too much soil each time, and the heavy duty excavator bucket should not be too strong to avoid damage to the machinery or cause overturning accidents. When the bucket is falling, be careful not to impact the track and the frame.

2. Vehicles and pedestrians are not allowed to stay within the excavator's loading range. When unloading materials to a car, wait for the car to stop, and after the driver leaves the cab, turn the heavy duty excavator bucket to unload materials to the car. When the excavator is rotating, try to avoid the bucket from passing over the top of the cab. When unloading, the bucket should be lowered as much as possible, but be careful not to collide with any part of the car.

3. Do not turn, walk, etc. without leaving the digging bucket in front of the ground. When the bucket is fully loaded and suspended in the air, it is not allowed to raise or lower the boom and walk. When the crawler excavator is moving, the boom should be placed in the forward direction of travel, and the height of the heavy duty excavator bucket from the ground should not exceed 1 meter. And brake the slewing mechanism.

4. When digging loose-grained soil on a high working surface, the large stones and other debris in the working surface should be removed to avoid accidents caused by collapse. If the soil is dug into a suspended state and cannot fall naturally, it needs to be handled manually, and it is not allowed to smash or press it down with a bucket to avoid accidents.