How to reinforce the excavator gp bucket 1

The excavator gp bucket is a consumable part, especially in the stone construction environment, the bucket wear rate is very fast. When the bucket is worn to a certain extent, timely reinforcement of the bucket can effectively increase its service life. However, Huitong Machinery has observed that most excavator users have blind spots on the problem of bucket reinforcement. They often just weld a lot of various steel plates at will. As everyone knows, such blind reinforcement of the bucket is more harmful than the excavator itself. Advantageously, it is necessary to master scientific reinforcement methods to reinforce the bucket. Next, Huitong Machinery, which specializes in the production of buckets, will talk to everyone about the reinforcement of buckets.

Precautions for strengthening excavator gp bucket

Reinforced excavator gp bucket needs to be cautious. Blind operation does more harm than good

Most excavator users believe that the thicker and stronger the excavator gp bucket, the longer the service life. Therefore, when the bucket needs to be reinforced, a large amount of steel is welded around the bucket to coat the bucket with a thick layer. Armor. Huitong Machinery does not deny that this approach will greatly extend the service life of the bucket, but have you considered the experience of the excavator itself when doing these tasks?

Reinforced excavator gp bucket

We all know that the manufacturing technology of excavators has a history of more than one hundred years of development. Manufacturers have equipped excavators with bucket technology that is very mature, and every bucket designed by engineers is perfectly applied. Should mechanics. Without excessive wear of the excavator gp bucket, a wide range of welded reinforcement plates will only destroy the stress of the bucket itself, increase the digging resistance, and sometimes accelerate the wear and cracking of the bucket. Secondly, if the bucket is protected in all directions, it will inevitably increase the weight of each bucket. A heavy bucket will not only increase the fuel consumption of the machine, but also work under high load conditions will have a considerable impact on the life of the machine. Therefore, if there is serious wear and tear of the bucket, it should be properly reinforced on the part, wherever the wear is serious, reinforce wherever it is, and replace it with a new bucket if it does not work.

Pay attention to the following points in the reinforcement of excavator gp bucket

First of all, two key issues must be paid attention to in bucket reinforcement, one is firmness, and the other is effective. First of all, it is very necessary to find a welder with better skills. If the welding process is not in place, it will greatly affect the quality of the excavator gp bucket and affect the service life of the bucket.

Reinforce the bottom of excavator bucket

Excavator arm reinforcement

Secondly, don't blindly wear thick armor to the bucket, which will reduce efficiency and increase fuel consumption. An expert once did a study: for every 0.5 ton increase in the weight of the bucket, the cycle time increases by 10%, and the annual gross profit decreases by 15%. Therefore, welding is performed on the parts that need to be strengthened most instead of the overall welding.