How to protect stump ripper excavator during outdoor construction in rainy day

1. Clean in time

It should be cleaned in time in heavy rain, otherwise it will cause sludge to accumulate in the gap on the underside of the stump ripper excavator. This is the place where moisture usually hides, and it is also the place most likely to cause rust. Therefore, we need to remove the clay, sludge, and gravel attached to the stump ripper excavators in time.

2. Paint protection

The acidic components in the rainwater have a strong corrosive effect on the paint surface of the stump ripper excavators, and will cause damage to the paint surface of the excavator over time. Therefore, in the rainy season, it is best to give the excavator a paint finish. . The simplest is waxing, and the longer-lasting effective is to seal the glaze. Regardless of the method, put on an invisible protective coat on the excavator to prevent the paint from fading and aging.

3. Chassis care

The chassis is the part closest to the ground, which is particularly severely affected by road conditions. Generally, this part is most prone to rust and spots, and the wheel shell may even be loose and perforated. Therefore, we must pay attention to the cleaning and rust prevention of the stump ripper excavators chassis, and do a chassis rust prevention treatment.

4. Ignition start

On rainy days, the engine is often difficult to start, and sometimes even if it is reluctant to start, it is also powerless. This kind of problem may be caused by the leakage of the ignition system due to moisture, thus losing the normal ignition function. Once it is found that poor ignition and engine performance are caused by the humidity of the ignition system, it is best to use a dry paper towel or dry cloth to dry the inside and outside of the distributor and the wires, and then use a special desiccant spray can to spray the desiccant. At the battery connector, line connector, high-voltage line, etc., wait for a while to start.

5. Other matters needing attention

Look at the weather forecast. If the construction site is in a valley, a mountain slope, or an unstable dirt road, you need to pay more attention to future weather changes, take preventive measures in time, and move the stump ripper excavators to a safe place. Avoid the excavator too close to the edge of cliffs and ditches, where the ground is soft, and the excavator's own weight and vibration can easily cause the machine to fall or tip over.