How to cool down your ripper arm of the excavator in summer

The northern hemisphere is about to enter the summer. In the face of the hot summer, many projects are facing the test of high temperature. The outdoor temperature has reached 30 or more in many countries. It may not be obvious to people working indoors, but for outdoor work, the temperature is definitely "difficult." , Especially on the construction site, not only the workers are "very hot", but the ripper arm of the excavator is also "very hot". How do we cool down your ripper arm of the excavator in summer?

Everyone knows that the summer temperature itself is very high. These large machines are exposed to the sun, even if they are not working, they are very hot. Moreover, the ripper arm of the excavator deal with large stones every day. The olecranon device is used to crush the stones and cause friction. It’s hot, let alone that the rock arm has been working for several hours. The surface device must be "hot", so we have to rest at this time, people have to rest, machinery also has to rest, so that it can be more durable, because of the temperature of iron. There is a melting point. If the temperature is too high, the hardness of the iron cannot be guaranteed. In the face of such high-strength working conditions, if the hardness is not enough, how can it compete with the stone? Seriously, it may even bend or be damaged.

So how should we cool down reasonably? In fact, we use physical cooling during the rest time, and slowly pour water on the position of the olecranon. If the temperature is too high, the water will evaporate immediately, and the coolant must be kept within the scale line. If even basic maintenance is required No, even the best ripper arm of the excavator will have a shorter service life, so summer is here, you must cool down your excavator rock arm!