Can not ignore the oil pressure of the ripper arm of the excavator

In fact, all machinery uses organic oil, and the role of engine oil is simply too much. If diesel is the blood of the engine, then engine oil lubrication is the most indispensable hemoglobin, but many people’s attention is not on the engine oil, and they think there is no It is so important, and even ignored. This idea is wrong. The oil pressure of the ripper arm of the excavator must not be ignored. Be careful of overhauling! Maybe everyone immediately became energetic as soon as they heard the overhaul, so how should we usually pay attention to the pressure of the oil on the ripper arm of the excavator?

Even if everyone has spent enough time and energy to observe the oil, there will still be a lot of severe engine wear caused by insufficient oil pressure every year. The crankshaft, bearing bushes, and cylinder liners have varying degrees of wear due to poor lubrication. In severe cases, they may need to be overhauled. The engine has a huge loss. In fact, there are many reasons for the abnormal oil pressure of the rock arm of the excavator. For different causes of the failure, we have different ways to repair or deal with it. For example, for the problem of insufficient oil, we need to observe the oil level every day. If necessary, increase the oil appropriately. If the oil pump does not rotate, the oil pump needs to be disassembled and checked to check its wear status. For parts such as radiators that are prone to leaks in the oil lubrication system, they need to be overhauled in time and the pressure sensor Overhaul or replace.

Therefore, in addition to the lubrication effect, the oil of the ripper arm of the excavator is also connected to the major working areas. The low oil pressure of the ripper arm of the excavator cannot be ignored. After all, no one wants a good engine to experience abnormal wear, let alone because of it. Bring construction obstacles, so you must pay attention to the pressure gauge when working, so as not to damage your rock arm engine, so the above-mentioned failure points must be kept in mind.