How to extend the service life of bucket tooth

Bucket tooth is frequently replaced in excavator attachments. How to protect the bucket teeth has always been a headache for many friends. Today we will look at how to extend the service life of bucket tooth:

1. After years of feedback from the excavator market, it has been proved that during the use of excavator bucket tooth, the internal bucket tooth of the outer bucket arms at both ends wear out 30% faster, so we recommend that the bucket tooth be used for a period of time. Position, thereby extending the service life of all bucket teeth.

2. The use of bucket tooth should also pay attention to the working environment. Different working environments use different bucket tooth. The targeted use of bucket tooth can reduce the wear of the bucket tooth and at the same time reduce the excavation resistance and save the fuel consumption of the excavator.

3. The correct operation of the excavator driver during driving is also very important to the protection of the bucket tooth. Correct operation can reduce the direct collision between the bucket tooth and the object, and reduce the rupture of the bucket tooth and the cracking of the large and small arms caused by irregular operation. occur.

4. The wear of the gear seat also plays a key role in the service life of the bucket tooth of the excavator. It is recommended to replace each gear seat after 10%-15% wear. Because the gap between the worn tooth seat and the bucket tooth is too large, it will change the stress point and fit between the two, which will cause the bucket tooth to break.

5. Because most of the bucket tooth does not consider the left and right forces in the design, it is necessary to avoid swinging the excavating arm left and right when the bucket tooth are subject to greater resistance, which can reduce the excessive force between the bucket teeth and the tooth seat And the probability of breakage.