How to maintain the wear resistant rock bucket of excavators

    As we all know, the wear-resistant Severe Duty Bucket is an important part of the excavator's working device. The most commonly used accessory is the wear-resistant Severe Duty Bucket when the excavator comes out in some specific working situations. However, compared to the main components such as the engine and hydraulic parts in the excavator, the wear-resistant Severe Duty Bucket with a simple structure often does not get too much attention from users, so does the bucket really require maintenance ? The answer is naturally NO!

    Suitable for different excavator buckets to make the work even more powerful

    Perhaps at this point in the article, you will feel that the bucket is just a simple working device, and there is no desire to read it anymore. Then you are wrong. The excavator bucket is indeed the most common terminal working device in all the accessories of the excavator, but it can be divided into dozens of different types according to the different materials and functions. In daily work, it is correct The selection of different types of buckets can achieve the desired effect in terms of construction efficiency and cost control. Proper maintenance of the wear-resistant Severe Duty Bucket can increase annual gross profit by 15%

    As the saying goes: "Workers must first sharpen their tools if they want to do well!" Not to mention that there are dozens of different types of buckets for you to choose from in the market for different working conditions, just maintain your existing digging Do you believe that it can increase construction efficiency and control construction costs?

    To maintain the excavator bucket correctly, the bucket teeth are the key

    Reinforced bucket teeth of excavator

    Bucket teeth are the terminal of the excavator's working device. In the process of excavation, the bucket teeth are the working parts with the greatest load and are consumable parts. Especially in the stone construction environment, the bucket teeth wear very fast. The use of bucket teeth can actually directly affect the work efficiency and production cost of the excavator. Just imagine, when the tip of the bucket teeth is worn out, the excavator needs to cut in during excavation operations. It will inevitably increase greatly, resulting in greater fuel consumption and affecting work efficiency. Therefore, it is very necessary to replace the new bucket teeth in time when the bucket tooth wear is serious.

    The wear-resistant Severe Duty Bucket of the excavator should also be checked daily

    The wear-resistant Severe Duty Bucket the excavator is broken

    In the daily maintenance work of excavators, if you can check the fuel, lubricating oil, water and air every day, you can reduce machine failures by 70%. If you want to make your love machine better and more economical in your daily work, then spend 2 minutes every day to check the bucket. The main inspection contents are: the degree of wear of the bucket body and whether there are cracks. If the degree of wear is more serious, reinforcement should be considered. As for the cracks in the bucket body, it should be repaired by welding in time to avoid increasing the length of the cracks due to delayed repairs and causing impossible maintenance. In addition, use your foot to kick the bucket teeth to check whether the bucket ruler is stable. If the bucket teeth are loose, they should be tightened immediately.

    For a long time, the wear-resistant rock buckets of excavators with simple structures often do not get the attention of users, which invisibly reduces the construction efficiency and increases a lot of construction costs.