Digger Attachments, OEM Booms, Buckets Manufacturer News

Excavator bucket attachments replacement frequency

2021-08-02

Excavator bucket attachments replacement frequency

Therefore, how often should the excavator bucket attachments be replaced? For questions, you can refer to the above content and replace it according to the specific situation.

Vistor

How often does the excavator bucket attachments need to be replaced?

The basic type of bucket earth and stone works are more worn out and the level is lower, about 4-5 months, it is better to replace it. The rock bucket can change the teeth faster. Like granite, you have to replace the teeth in a week. The side teeth (knife angle) on the excavator bucket attachments should be screwed to avoid falling off during construction.

It turns out that there are so many skills to drive a ripper boom

As far as driving ripper boom is concerned, the operation of a master and a novice is quite different, because many masters have already I have mastered a lot of skills for driving rock arms.

The role of ripper boom in the construction of subway station

In addition to these common functions, secondly, the fuel economy is lower. Don’t think that the ripper boom will become larger and the fuel consumption will increase.

This kind of long reach front combines three functions in one

In addition, some potholes that are usually seen beside the road can also be solved by using an excavator to modify the long reach front. At the same time, Huitong Heavy Industry will also add sufficient materials in the manufacture of extension arms to provide people with better quality extension arms.

What to do if the long reach front of the excavator is installed crookedly

Before talking about the problem that the long reach front of the excavator is installed on the wrong side, let's first talk about what kind of excavator can modify the extension arm. The general recommendation is to modify 50% to 80% of the new excavator.

Why is there such a big difference in the price of custom excavator bucket two

Finally, let me reveal a little secret. It is best to buy a bucket to see if the merchant has a stock bucket; the back plate must be bent during the production of the custom excavator bucket;

Why is there such a big difference in the price of custom excavator bucket one

The custom excavator bucket, teeth, and roots are consumables; when many bosses choose buckets, because they don’t understand the craftsmanship and production insider of the bucket industry, they often take the price seriously in order to avoid being deceived.

How to build a more efficient and durable custom-made excavator buckets?

For the bucket, the most important thing is that it is durable and has a long service life, so that it can exert the greatest digging force and create greater value, but how to build a more efficient and durable custom-made excavator buckets is also a problem.

What should be paid attention to when custom-made excavator buckets

The same is true for the custom-made excavator buckets.However, in order to customize them perfectly, experts said that the following three points must be considered when customizing.

Things to pay attention to in typhoon days with excavator long reach front

The excavator long reach front should be lowered and retracted back to the transportation state to avoid damage to the extended boom and accessories.

Dangerous behavior in the eyes of excavator long reach front

The maintenance of the extension arm of the excavator needs to start from the following aspects; first, we can check the excavator long reach front that needs to be placed for a long time, such as whether the screws of each part of the excavator long reach front are loose, whether the gears of the gears are meshed or not.

Vistor