Digger Attachments, OEM Booms, Buckets Manufacturer News

What is the reason for the slow working frequency of excavator hydraulic breaker

2021-05-17

What is the reason for the slow working frequency of excavator hydraulic breaker

Therefore, the working frequency of the excavator hydraulic breaker is not only to consider the problem of the excavator hydraulic breaker itself, but also to consider whether the excavator has malfunctions and problems.

Vistor

What is the reason for the weakness of excavator hydraulic breaker

First of all, it is clear whether the attack is weak or the attack frequency is slow. The excavator hydraulic breaker blow force is mainly related to the nitrogen pressure, and the blow frequency is related to the flow rate. There are also other factors.

Common problems of excavator hydraulic breaker

Excavator hydraulic breakers are used for mining, quarrying, excavation and dismantling, and can be cut out from large stones or current reinforced concrete. Sometimes the application of engineering obstacles or the lifting of very thick stone layers, but the excavator hydraulic breaker shows a more controllable whole process.

Do you know the correct use of a excavator hydraulic breaker

The excavator hydraulic breaker is generally used in demolition and mines. During the construction, dust is easy to enter the breaker cylinder along the steel drill, which will cause the pollution and aging of the hydraulic oil.

How to maintain the excavator HD bucket

The main inspection contents are: the degree of wear of the excavator HD bucket body and whether there are cracks. If the degree of wear is severe, reinforcement should be considered.

Correct maintenance of excavator HD bucket-bucket teeth are the key

In the daily maintenance work of the excavator, take 2 minutes to check the excavator HD bucket every day.

The excavator long fronts that you don’t own is so important

In addition, the technicians of the excavator long fronts can also learn from each other and learn more advanced manufacturing technology. When the excavator long fronts encounters problems during use, the defects should be eliminated in time to provide experience for the next manufacturing.

This operation is very important for the excavator long fronts

Due to the influence of the construction environment, the appearance of the excavator long fronts is prone to corrosion and rust. Therefore, when this phenomenon occurs, rust removal, repair, and painting must be carried out in time.

How to reinforce the excavator gp bucket 1

The excavator gp bucket is a consumable part, especially in the stone construction environment, the bucket wear rate is very fast. When the bucket is worn to a certain extent, timely reinforcement of the bucket can effectively increase its service life.

How to reinforce the excavator gp bucket 2

The angle of the bucket teeth should be adjusted according to the travel trajectory of the stick. The teeth of the excavator gp bucket must be inserted into the soil like a knife cuts vegetables, rather than "slapped" into the soil.

What technology expands the horizons of excavator long reach front manufacturers

So in what way does this technology open up the vision of excavator long reach front manufacturers? One is laser cutting; with this technology, people no longer have to manually cut, and they don't need to carefully measure to cut, but can easily complete the cutting work by relying on laser cutting technology.

Vistor