< img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=282785257505389&ev=PageView&noscript=1" />
  
News

What does ripper boom excavator need to pay attention to when working in quarry

Published by HuiTong 2023-12-20

When you open an ripper boom excavator, the working conditions are different every time you work, and the places you need to pay attention to when working under different working conditions are also different. Today, let me talk about what you need to pay attention to when working in a quarry.

 

ripper boom excavator

 

1. The environment of the quarry is difficult and dusty, and the air filter must be replaced frequently

Because the quarry needs to crush and excavate stones, there is a lot of dust, and the dust is also mixed with larger particles of gravel, so the normal working cycle of the air filter is greatly shortened, and it needs to be blown frequently;

The replacement cycle should be shorter than the normal cycle, otherwise it will cause serious damage to the engine. Don't save a small amount of money and lose a lot of money.

 

2. Please do the gentle operation of the good master to prevent damage to the structural parts, tearing of the large and small arms, and at the same time to reinforce the bucket

 

3. Pay attention to the safety of vehicle personnel and prevent rockfall during loading

The working environment of the quarry is more complicated, and noisy sounds can easily interfere with the driver’s attention. Some dump truck drivers are used to checking tires while waiting for loading. At this time, you must pay attention to prevent stones from falling during loading. Hit the surrounding personnel, otherwise the consequences would be disastrous.

 

ripper boom excavator

 

4. Don't work under the mountain when it is raining, stay away from the edge of the mountain when parking, and don't climb up to the high place frontally when discharging the danger, don't use stones as the bottom

 

5. When going up the mountain, the road must be low inside and high outside. When placing stones under the mountain, pay attention. The soil is the stone when you go down.

When blasting rocks on the mountain, although there is a safety zone, there are still broken rocks flying out of the predetermined range, which may cause safety accidents. Therefore, be sure to hide behind solid obstacles when shooting or blasting rocks and do not stretch your head.

 

6. Beware of landslides! Falling Rock! See all directions and listen to all directions! Want to see more! Most predictable

 

7. It's best not to go to the risk on a rainy day! Study the rock structure more, dig along, don't be hard, and gradually dig in from the side!

 

ripper boom excavator

 

8. Keep in mind to move forward and retreat, and develop good habits

Many times, the ripper boom excavator is docked on the edge of the cliff to perform operations. When you want to move the excavator, you must not make a mistake in the forward and backward directions of the crawler, otherwise unimaginable tragedies may occur. The best thing is to keep your hands pulled back, so that you can be self-aware in times of danger and avoid accidents.

 

9. Keep your own escape route at all times, just in case; the part beyond the fence must be checked whether it will fall, so as to prevent it from falling and hurting people!

 

10. Don't put your forearm too far when digging a big rock and spinning.

whatsapp