Digger Attachments, OEM Booms, Buckets Manufacturer News

How to park long front boom excavators in rainy season

2021-11-12

How to park long front boom excavators in rainy season

In the rainy season, pay attention to checking the filter element of the air filter of the long front boom excavator to prevent rainwater from entering, causing the paper filter element to deteriorate and become clogged.

Vistor

Excavator bucket material and its weldability

For this reason, short section welding, intermittent welding, soak welding, etc. should be used when welding the excavator bucket body and the bucket teeth of the excavator.

Bucket tooth maintenance can not be ignored

In addition, the bucket tooth can be kicked to check whether the bucket teeth are stable. If the bucket teeth are loose, they should be tightened immediately. To maintain the bucket of an excavator correctly, the bucket tooth are the key. Don't neglect the daily maintenance of the bucket teeth.

Welding technology of excavator bucket body and bucket teeth

First cut off the worn bucket teeth from the bucket body, and then use an angle grinder to polish the place where the bucket teeth are installed.

How much do you know about excavator quick hitch coupler

Product classification: According to different working principles, excavator quick hitch coupler can be divided into hydraulic drive type, mechanical type, and butter drive type.

Application and advantages of self-lubricating bearings

The application of self-lubricating bearings (graphite copper sleeve) in excavators effectively simplifies the mechanical design, and its structure is simple, the manufacturability is good, the maintenance cost of the machine is reduced, the quality is reliable, and it is helpful to improve the work of the whole machine reliability.

Application and advantages of excavator copper sleeve

The application of excavator copper sleeve in hydraulic excavators has 12 applications of self-lubricating bearings, which are mainly used in parts such as booms, sticks, chassis running mechanisms, body parts, and hydraulic components.

How to repair the excavator when raising the excavator long reach arms slowly

When the excavator long reach arms cylinder piston receives the bottom, remove the rodless cavity tubing so that the rod cavity of the boom cylinder continues to be filled with oil.

Do you know other uses of excavator long reach arms

Why is the excavator long reach arms counted as ten? , It uses the ultra-long boom and the ultra-long stick to show its great power.

Selection of digger bushes material

It is used for high-strength screws, nuts, digger bushes, sealing rings, etc., and wear-resistant parts. The most prominent feature is its good wear resistance.

The role of excavator copper sleeve

Excavator copper sleeve are also called copper bearings. Copper sleeves are made of various copper alloys. Copper sleeves are usually used for lubrication of mechanical parts.

The difference between oil-impregnated bushings and self-lubricating bushings 2

The lubricating material of the oil-containing bushings is lubricating oil, and the oil film has enough thickness to eliminate the direct contact between the two friction surfaces.

Vistor