It is said that the demolition arm excavator relies on technology , courage , luck. I don't agree with it. It is luck to prove that the safety precautions have not been adequate. Under such circumstances, the risk of demolition will increase.
Excavator quick connector, also known as quick-change connectors. Excavator quick connector can quickly install various configuration accessories on the excavator, such as buckets, rippers, breakers, hydraulic shears, wood grabs, stone grabs, etc., which can expand the scope of excavators, save time, and improve work efficiency.
Today we are going to share about the demolition of a house with a demolition front end boom and sticks excavator. The object of demolition today is a very simple house with a long span.
Common demolition equipment includes special demolition boom, breaker excavators, and dynamic compactors. Different equipment is suitable for different working conditions.
The most common is that the excavator demolition boom occupies the correct position at the bottom of the building, and it is demolished with the strength of the large and small arms.
In the hydraulic system of pile-driving boom excavators or other heavy industries, it is inseparable from the use of rubber hydraulic hoses, and failures such as seepage, cracks, ruptures, and loosening are not uncommon during use. Let’s analyze it for everyone. .
The tubing of the high reach demolition boom excavator is equivalent to the blood vessels of the human body. Whether the tubing is burst, damaged or aging, it will have a huge impact on the operation and construction of the machine.
The boom action of the demolition boom excavator is one of the most frequently used actions in the daily construction process. If the boom has problems such as slow lifting and weakening, it basically declares that it needs to stop for repairs.
If the hydraulic working device moves slowly, it indicates that the failure of the long reach front cylinder to lift slowly lies in the main oil supply or the total oil return part.
There are many reasons for the slow lifting of the long reach boom of the excavator. This article gives a detailed analysis and diagnosis of this fault, so that we can reduce the occurrence of faults as much as possible during the construction and make our construction work smoothly.
In some specific environments, how should we better protect our long reach front excavator? Let's take a look with the editor below!
When you open an ripper boom excavator, the working conditions are different every time you work, and the places you need to pay attention to when working under different working conditions are also different. Today, let me talk about what you need to pay attention to when working in a quarry.